Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$44.99
- E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring
- Center clearance for E-Bike wiring is 0.812". 12-spline 23mm OD tool fittings
- Made in the USA
$52.99
An essential tool for your shop.
Designed to work specifically with the 36mm OD IsoStrut from Fox.
Proprietary tool for Trek bikes equipped with 2020-2023 IsoStrut.
Details:
- Refer to the Service Manual for assembly instructions and service
- Contains 2 presses, one for each end
- Compatible with a standard headset press to install both bushings at once
$9.99
Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way hex. Sunlite's Hex Wrench has a 4, 5 and 6mm hex to fit the most popular sizes on your bike. The rubber handle lets you wrench all day in comfort, too.
$6.99
• Precision-sized, hardened-steel, chrome-plated spoke wrench
• Deep U-channels for a great grip
• 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples
• Made in Taiwan
$12.99
Sunlite's Series II Chain Tool works with Shimano IG, HG, and UG chains. The vinyl coated handles make chain maintenance a breeze, and the screw style makes loosening up a stiff link easy.
$9.99
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$74.00
Shimano Genuine Professional disc brake bleed kit
Includes:
- TL-BR002 Funnel unit for ST series Road Brake lever (M7 thread bleed port)
- TL-BR003 Funnel unit for BL series MTB brake lever (M5 thread bleed port)
- TL-BR001 Syringe unit
- 4-pcs set of Bleed Blocks (Piston spacer)
Features:
- New oil spill guard lid with an integrated oil stopper holder
- Improved syringe unit design now using a stronger threaded tube joint and revised locking clip
- Bleeding instructions available for download under 'Documents & Links' below
$19.99
Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port)
Features:
- Oil spill guard lid with an integrated oil stopper holder
- Funnel base
- Bleeding instructions available for download under 'Documents & Links' below
$52.99
Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.
$60.00
The ultimate starter combo kit!
- Medium-sized saddle bag
- Ballistic nylon bottle cage
- 15 function super tool with CO2 inflator
- Tire levers
- 8-piece patch kit
- 2 threaded 16g CO2 cartridges
$38.00
The SRAM chain wear indicator tool is compatible with all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification.
$83.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following:
• 2 syringes/fittings
• bleed blocks
• Torx tool
• Crow's foot
• Bleeding Edge Fitting
• DOT 5.1 hydraulic fluid
$50.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$43.00
Periodic hydraulic damper bleeds are necessary to maintain consistent performance. RockShox's Charger Damper Bleed Kit has everything you need to keep your Charger-equipped fork charging hard.
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$34.00
Re:Aktiv Piston Socket (Required for ReAktiv 200 hour service) - Deluxe
$37.00
Factory service kits for Reba A7 forks
$188.30
$269.00
30% Off
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes.
- Every detail machined and optimized to save on weight and maximize your performance
- Factory tuned compression (in open position) provides the highest level of XC performance, precision and control
- Maximum efficiency with a rock-solid lockout
$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$66.00
200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RING SEALS, CHRC DAMPER SEALHEAD, DEBONAIR (SILVER) SEALHEAD - ZEB R/SELECT A1 (2021)
$20.00
Simply Accurate – Maintenance-free, Reliable and Affordable
Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration.
Easy to use
Ergonomic handle fits your palm with a four-finger grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 60% lower height than tools costing twice as much.
Use it like a tool – safe to un-screw!
Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. 50% thicker walls in the bit shaft make our tools stronger and more reliable than others. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings.
More Options
Prestacycle TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits.
Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles.
Specifications:
- Torque value accurate to + / – 10%.
- Provides 20 degree overrun when maximum torque is reached.
- Overrun provides user with unmistakable feedback when torque value is reached.
- Polymer T-Handle ergonomically designed for comfortable four-finger & palm grip.
- Color-coded tension markings on both sides.
- 12mm wide Zinc shaft has 50% thicker walls – stronger than other Torque tools.
- Magnetic 1/4" hex bit retention makes bit changes easy.
- Torque accuracy life-cycle exceeds 5000 cycles.
- Simple to Judge – If the logo is worn, the tool is past life.
- Replacing the tool costs less than other tool's calibration service.
- Height: 64.5 mm, 2 1/2 inches.
- Width: 81 mm, 3.18 inches.
- Weight: Approx. 75 grams.
- 1 Year limited consumer warranty.
Disclaimers
Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.
$33.00
Sometimes the task at hand requires more hands than available. If you've ever worked with some of the more finicky bicycle brakes, you know what we are talking about. Pedro's Cable Puller (commonly known as the "Fourth Hand Tool") provides the perfect tool for tensioning brake or derailleur cables while making adjustments. Featuring one hand operation, ergonomic cushioned handles, and a thumb lock, this tool simultaneously grips and tensions the cable while keeping your other hand free to secure the cable in place. End the frustration and pick one up! Made from heat-treated laser-cut steel.
$5.00 - $131.76
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task.
- Award-winning and universally loved
- Molded box construction and proprietary plastic blend makes these the strongest levers available
- Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping
- Bold shape makes it easy to remove the tightest of tires without bending or breaking
$11.00 - $14.99
Y-Style Hex Wrench
- Perfect for common hex hardware found on modern bicycles and components.
- New improved ergonomic Y-style handle design.
- Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication.
- Designed to stand up to the harsh conditions of professional use.
- Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use.
- The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification.
- Backed by Pedro's lifetime warranty.
$15.99
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-1 FEATURES
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
$13.99
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-3 FEATURES
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
$16.99
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
Page 1 of 49
Next page