Tools/Maintenance

The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers. Includes: - Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems - Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems - Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems - Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems All parts also available individually. NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Bit socket with 1/4 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

- Compatible for Manual and power tool socket insert (ISO 2725-Part 3) - "Take it easy" Tool Finder with color coding according to size - Featuring a good grip to allow easy pick-up even with oily hands. - Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.

This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.

Precision brake bleeding tools and adaptor kits for Magura brake systems.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

- Heat treated - Individual hex keys

Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor

- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver

Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.

- Fits T10 and T25 Torx bolts - Knurled handle for grip

For dust cap removal on Origin8 XLT integrated cranks

- Cleans and polishes painted, anodized, and plastic surfaces - Loosens dirt and grime for easy cleaning - Sprays on and wipes away quickly and easily - Carnauba wax creates a long lasting protective shine

- Quickly removes grease, oil, and other contaminants from electrical components - Propellant provides maximum spray pressure - Allow hot surfaces to cool before applying - Quick drying, leaves no residue - Safe for most plastics - Citrus scented - VOC compliant

Inserts and removes Presta valve cores

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together

Brake pad spreader tool for Avid Elixir brakes.

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

- Quality alloy construction makes valve core removal and installation a breeze. - Designed for a lifetime of use to keep you rolling for years to come.

Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

To adjust preload on Hollowtech II cranksets

High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

• 5/6mm hex wrenches